MAXAIR Ball Valve For Compression Pipe - Various Sizes
Please Note: This freight is based on smaller quantities, if you wish larger quantities please contact us for a freight quote as we will optimize the parcel for shipping.
These Fittings are joined quickly and easily by hand and offer the advantage
of being removable and reusable.
In order for PP mechanical compression fittings to comply with the requirements of AS/NZS 4129, it is normally considered necessary to provide reinforcement to female threads larger than 25mm. This reinforcement should also be corrosion resistant and is normally provided in the form of a stainless steel ring.
Threaded outlets larger than 50mm should be avoided.
The use of PTFE (Teflon) tape is solely recommended for all fittings with plastics
threads.
Quality Certifications
These fittings are manufactured under a certified quality system, ISO 9001:2008, which has been approved by CCC and lQNet.
The complete range of mechanical compression fittings have been tested and approved by leading certification agencies, they have Australian Watermark approval and comply with AS/NZS 4129:2008 and NATA accredited Australian Water Quality Centre as well as internationally recognised DVGW (D), KIWA (NL), WRAS (GB), SlI (IL), BV (AUS) and many others worldwide.
Furthermore, the fittings are endorsed with product certifications on all related standards such as ISO 14236, EN 12201 & DIN 8076.
Projected Life Expectancy
Based on the information available and the successful performance under the nominated test procedures, the design life expectancy is rated at 50 years before replacement or major repair.
This rating is only a general guide to life expectancy and may increase or decrease
depending on the quality of the installation, system operation and environment conditions as well as other geographical and site specific factors.
Operating Temperature
The fittings are not to be used in hot water although they withstand the same temperature as the polyethylene pipe itself.
The fittings withstand sub zero temperatures.
The pressure rating has to be adjusted as shown in the figure below, if the fittings are to be used in higher temperature.
The range of metric compression fittings are suitable for high pressure conveyance of water, irrigation, gaseous fuels, compressed air, chemical solutions and slurries.
Range: 16mm up to 110mm
Pressure Rating:
16 bar at 20°C for fittings from 20mm up to 63mmØ
12.5 bar at 20°C for fittings from 75mm up to 110mmØ
Your may also be interested in following product
$7.40 – $26.00
Genius 1/2" Drive Metric Impact Sockets Cr-Mo V...
Description Please note: All of our Impact Sockets are Cr-Mo (Chrome Moly) unless stated otherwis...
Description Please note: All of our Impact Sockets are Cr-Mo (Chrome Moly) unless stated otherwise. The addition of molybdenum gives this alloy the ability to absorb percussive impact better than Cr-V; it also outperforms Cr-V in strength and toughness, but it is more expensive, which is why is reserved for impact rated and high-end tools. 1/2" Dr. Impact Sockets 6pt Standard Depth Unit Individual System Metric Point 6 pt. Style Shallow Tool Type Socket Material CR-M...
$39.00
Ezyneez Kneeling Pad 50 x 30cm
Description 30 x 55cm High density foam covered with a zip-off non-porous quality vinyl cover pro...
Description 30 x 55cm High density foam covered with a zip-off non-porous quality vinyl cover providing an insulation barrier between the floor and the user, while giving excellent cushioning. The Back of the pad has a non slip pad to help the pad stay where you put it. Ideal for use in the workplace or home. Great for gardening , working on your car or anything that requires you to be Kneeling down.
$299.00
RivetLab Rivnut Tool – for Nutsert/ Rivet Nuts ...
BRAND : RIVETLAB PRODUCT CODE: RT-512-KIT The RivetLab® RT-512 is a professional standard hea...
BRAND : RIVETLAB PRODUCT CODE: RT-512-KIT The RivetLab® RT-512 is a professional standard heavy duty hand Rivnut Tool. It is capable of setting rivet nuts from M5 to M12 in all materials and rivstuds from M5 to M8. This tool features fast and simple change of nose assemblies and has laser engraved stroke gauge to assist with blind rivet nut setting. The RT-512 Rivnut Tool is supplied in a carry case with full set of nose assemblies for rivet nuts and rivstuds. PACKAGE ACCESSORIES Mandr...
$77.00
STAR SPRAY GUN AIR REGULATOR P/n 06137-SG +$10....
This is a Gun mounted, "True diaphragm regulator" (Not a ball valve) with glass faced gauge. Max...
This is a Gun mounted, "True diaphragm regulator" (Not a ball valve) with glass faced gauge. Max input pressure 80psi, this will allow you to properly regulate the pressure going into your spray gun which will give your spray gun a much more consistent spray output. Will suit STAR:– HVLP SV2000– SV4000– SV106– SV870 series And all spray guns with a 1/4 bsp male thread (which most spray guns have) SKU06137-SG BrandSTAR GENERAL CategoryFilter Regulators